Skip to Content

Beginner’s Guide in Selecting The Right Bathroom Partitions

Approximately 60% of Americans claim they use a public bathroom one to five times each week, depending on their location. 21 percent of Americans use a public bathroom more frequently than once a week, at least six times a week, if not 15 or more times a week. Almost every public facility in the United States is equipped with restrooms. 

The American Restroom Association devotes an entire page to the rules and regulations that apply to toilets. In addition to toilet partitions, handwashing stations, and air exchanges are all included in this section of the website. Floor space and turning radius for the Americans with Disabilities Act, materials and hygiene for health, durability and slip resistance for safety, and other considerations. 

If you are in need of help in deciding on the best bathroom partitions, then you have certainly made the right choice of reading this article, especially when it comes to modernizing your public areas like business toilets.

Factors to Consider When Choosing a Bathroom Partitions

Your location dictates the specific restrictions you must follow. Certain jurisdictions have stringent requirements for the width, depth, as well as height of toilet walls. For instance, airport lobbies in the United States are held to a high standard. 

The fire and health codes are significant determinants. Your content selection may be restricted. Additionally, you must consider ADA compliance. After all the laws and regulations, three important elements become apparent:

  • The bathroom partition’s durability and resistance to damage
  • The bathroom partition’s convenience in cleaning and maintenance
  • The cost-efficiency of the bathroom partition

Types of Toilet Partitions That You Can Choose From

Toilet dividers are available in a variety of styles. When selecting a restroom, keep in mind the type and volume of traffic. A seldom-used executive restroom in an office building has distinct requirements from a crowded bus terminus. In a lot of the cases you will need to install custom toilet partitions due to specific requirements in size.

The following are among the most common types of toilet partitions, along with their advantages and disadvantages.

  • Solid Color Reinforced Composite 

This type of bathroom partition material is made out of cellulose, fibers, dyes, and also resin which also include a graffiti-resistant covering on the surface. They are resistant to cleaning agents in low- to moderate-traffic settings. The solid hues appear elegant and sanitary. It is resistant to vandalism and abuse and is cost-effective.

  • High-Density Polyethylene (HDPE)

While HDPE resin partitions resemble Solid Color Reinforced Composite barriers, they are far more durable. They are resistant to strong cleaners, scrubbing, and even the odd pressure washing. While solid resin partitions are more costly than laminated or powder-coated metal alternatives, they are projected to last far longer. Choose between cold neutrals and warm, optimistic tones. Solid dividers strike the ideal mix of form and function.

  • High-Pressure Laminate

Laminate is a versatile material that comes in over 30 distinct colors and designs. It’s inexpensive and simple to maintain. It is suitable for low-moisture locations such as workplaces or other areas with less circulation. 

Just like that of powder-coated steel, this material is also manufactured by gluing a thin layer of material within the honeycomb cardboard or a particleboard core. It may chip or peel with prolonged usage. It has a greater capacity for odor absorption than other materials. 

Laminate is a lightweight material that is simple to install. Laminate bathroom dividers are an inexpensive way to add color or a modern design to a bathroom. Laminate is resistant to corrosion. However, it is not resistant to harsh cleaning agents or dampness.

  • Compact Laminate

These dividers are constructed with a strong resin core and a durable melamine finish. They have the same color and adaptability as laminate dividers but are completely resistant to wetness because compact laminate bathroom partitions are bacteria- and stain-resistant, as well as resistant to paint, inks, and scratches. 

They are resistant to abrasive scrubbing and severe cleaning methods. They are a good option for toilets in schools as well as another high-traffic area because of their strong core, compartment accessories remain in place. 

Although compact laminate is much more costly than solid resin, it offers a greater range of colors and designs. This does not dent and seems to be scratch-resistant which makes this type of bathroom partition an excellent choice for shopping malls, restaurants, and other public gathering areas.

  • Powder-Coated Metal 

Powder-coated metal walls are the most often used and cost-effective solution for toilets. Steel with a textured powder-coated finish is the most common variety. Numerous hues are available. 

This durable finish begins with rough sheet metal applied to honeycomb-patterned cardboard inside. After applying the pigment powder, it is baked to create a strong, scratch-resistant surface. The procedure is comparable to that of painting an automobile. 

The metal, as well as powder coating quality, make a significant impact on the partition’s longevity. Grab bars and other compartment attachments rely on the stability of both the cardboard core and sheet metal. 

Powder-coated aluminum is the least expensive material for toilet partitions. However, this is not the most sturdy option because metal doors dent and can rust.

  • Stainless Steel Bathroom Partition Material

Bathroom partitions that are made out of stainless steel have surfaces that are either matte, satin, or textured which makes it more durable along with a sleek appearance and a subtle aesthetic. It is well-suited for high-traffic toilets and has an attractive appearance. 

It is simple to clean, hygienic, and long-lasting and it is also suitable for nearly any type of restroom. Due to the fact that high-quality stainless steel is impervious to corrosion and discoloration, it is excellent for use in some humid environments. Stainless toilet barriers, for example, are appropriate for pool installations. 

Stainless steel bathroom partitions are low-maintenance material, but there are still some finishes that are more susceptible to fingerprints than others. Scratches and dents are possible with stainless steel; nevertheless, these forms of damage are readily remedied. 

What Could Be the Right Choice When it Comes to Bathroom Partitions?

There are several other choices for toilet walls than those mentioned above. Budget constraints, anticipated bathroom usage, and bathroom layout all play a role. Consider the rules and regulations governing public bathrooms before making your selections. 

The ideal option for your restroom is one that satisfies your criteria for longevity, style, and simplicity of upkeep. Allow our specialists to demonstrate the entire variety of possible solutions. Choice Builder Solutions guarantees that public bathrooms are accessible to all and that they not only exceed ADA regulations but also your unique demands and aesthetic criteria.

This site uses Akismet to reduce spam. Learn how your comment data is processed.

This site uses Akismet to reduce spam. Learn how your comment data is processed.